Pellon SF-101 Stacey Shape-Flex Interfacing - White

Pellon Stacey Shape-Flex woven Fusible Interfacing in white.

All Purpose Woven Fusible Interfacing. Provides crisp support for collars, cuffs, yokes, pockets, facings and other detail areas of a garment. Adds body and permanent stability when used as a backing for needlework and punch embroidery.

For light to medium woven and knit fabrics, including oxford cloth, chambray, gingham, madras, tattersall, pincord, flannel, polyester/cotton blends for Blouses and Dresses. Washable, dry cleanable. Machine wash warm, machine dry medium, iron at wool/steam setting.

100% Cotton 20" Wide

Directions:

STEP 1 - Trim and Steam-Baste Pin pattern piece to SHAPE-FLEX® following grain-line arrows; cut. Trim seam allowances to 1/8"� (3mm) Place Fusible side of SHAPE-FLEX® to wrong side of upper collar, outer cuff, facing, etc. Pin, then steam-baste along edges with tip of iron. Remove pins.

STEP 2 - Fuse Cover with a DAMP press cloth. With iron at wool/steam setting, press FIRMLY for full 10 seconds. Repeat, lifting and slightly overlapping iron until all interfacing is fused. Use steam iron with metal sole plate. Hand-held steamers will not permanently bond interfacing to fabric.